Screen printing machine common faults during operation, we need to how to deal with

Screen printing machine common faults during operation, we need to how to deal with

     Screen printing machine has been the most widely used in printing industry, a printing equipment, is popular among people.But the captain of the Shanghai silk screen time of operation, always when operating to some common fault delay our production process, that is, we need to solve today we together to talk about the problem of how to solve:

The first kind of breakdown phenomenon:
      Semi-automatic not stepping on foot switch and action immediately.
Such failure causes are mostly pedal switch damage or foot switch socket lead to short-circuit the water, the other is a manual start button switch has a problem.Repair method is to change the new switch, socket, button switch or open repair damaged parts.
The second breakdown phenomenon:
     Semi-automatic work step on the pedal switch slide down, let go and then rise.
This kind of phenomenon is the cross slide on the left side of the proximity switch is damaged or broken wires, the solution is to replace the proximity switch or connect switch connection.
The third kind of breakdown phenomenon:
    Semi-automatic while working on the pedal switch state slide down, no action after printing seats left.
    This fault causes the cross slide on the left side of the proximity switch sensing or not have a problem.
Main solutions

     Solution is to adjust the left side of the proximity switch induction spot or replace good proximity switch;As well as micro switch pedal switch stuck not action, can also cause the failure.The solution is the micro switch within the pedal switch adjust, repair or replace the new micro switch.
More information about our products please continue to focus on our website: http://www.gwirobot.com